If you are looking to buy replacement parts for your Husqvarna robotic lawnmower, there are several places to visit. You can get wheel motor kits, heavy-duty wire, and boundary wire stakes. This is a great way to keep your lawn mower in good condition. It will save you money on repairs.
Wheel motor kit
Robotic lawnmowers need to be able to handle steep inclines. Depending on the model and price range, they can do this with relative ease. However, there are some pitfalls to avoid. If you’re not careful, your robotic mower could leave a big hole in your lawn. You’ll also have to stop at a charging station earlier than you should in order to prevent it from speeding up downhill.
Luckily, Husqvarna robotic lawnmowers are designed to handle steep slopes. The manufacturer claims that its four wheel drive models can turn on the steepest of inclines. A few newer models can tackle gradients up to 35%, whereas older models can only manage up to 45%.
Of course, this does not mean that robotic mowers cannot turn on a flat surface. In fact, many robots do just that. But it means they require a lot of energy to do so. That’s why some models are retrofitted with special equipment sets.
Heavy duty wire
Husqvarna Heavy duty wire is a premium product geared towards demanding Automower(r) installations. This is a heavy duty wire that will guide your robotic lawnmower for many years. Its special design features include an isolated surface to help minimize signal loss.
There are a variety of different types of boundary cables available for the robotic mower enthusiast. Most of these cables are essentially similar in construction. They include single or double insulation with steel wire as conductor. The material used will have a bearing on the electrical resistance of the cable.
One of the most impressive things about boundary cable is its flexibility. You can lay it in a number of ways, including on top of a soil layer, on top of a rock or in an existing boundary line. In many cases, this type of cable is more appropriate for small gardens.
Although it may be hard to come up with a specific rule of thumb, there are a few general guidelines to follow when installing a boundary wire. First, you must have the right diameter to ensure proper function.
Boundary wire stakes
Boundary wire stakes are part of a large range of Automower(r) accessories. You can find them at the Husqvarna website. In addition to the boundary wire, the product also comes with a loop wire, two special brushes, and a charging station.
Before installing the wire, you should create a blueprint of the work area. This will help you determine the correct distances to place the wire. The shortest distance should be at the edge of your lawn. For paved paths or gravel, a mid-distance is recommended. Depending on your area, you may need to install more pegs.
It is important to keep the distance from obstacles and steep slopes. Your mower will not be able to cut a sloped lawn. If you are installing the boundary wire in a slope, it is best to bury the wire. Digging a shallow trench can be another option.
You can use the boundary wire to connect two areas that are separated by a fence. You can also use the wire to form islands. When installing the wire, you must follow the instructions for each model.
Installation materials
If you are preparing to install your new Automower Ersatzteile, there are a few materials you need. You can find all the necessary items in a robotic lawnmower spare parts kit.
To ensure that the robotic mower will run properly, you must clear away all the obstacles around the area. This includes bushes, trees, ponds, flower beds, and any fixed objects in your yard. It is also important to keep a good distance from any exposed power cables.
After removing the obstacles, you should lay the boundary wire. This is the cable that will guide the robotic mower back to the charging station. Usually, the power cable of the robotic lawnmower is about 3 to 5 meters long. The guide wire should be laid at an oblique angle to the turf.
Boundary wire is anchored to the ground with special nails. You can bury the cable if you want to make it easier to install. However, it is better to lay the cable above the ground.
